How to Operate Deep Hole Honing Machine Correctly?

For honing equipment, deep hole honing machine more used in the machine tool industry. Honing head usually has two to ten outer whetstone, driven by the spindle rotation in the hole, and also repeated linear motion, but also supply for the hole wall, for whetstone reciprocating movement during the process, mostly beyond the hole outside the length of the stone can not exceed the length of 1/3, otherwise easy to produce adverse effects on the workpiece.

Honing margin is generally controlled in the range of 0.2mm, we need to be aware of the peripheral speed during the honing process, processing speed of steel is about 15 ~ 30 m / min. The requirements on the cast iron can be appropriately increased, and some can be increased to 50 m / min or more.